Melting and Casting
Steel and alloying metals are loaded into an electric arc furnace. Once in the furnace, the metal is heated to a specific temperature above its melting point, usually in excess of 2800°F.
What are the typical applications and industries that utilize Aluminium Bronze C95400 bars, rods, and wires?
Aluminium Bronze C95400 bars, rods, and wires find extensive usage across various industries and applications due to their exceptional properties and performance characteristics. One of the primary industries that utilize these materials is the marine industry, where Aluminium Bronze C95400 is favoured for its excellent resistance to corrosion in seawater environments. It is commonly used to construct ship components such as propellers, shafts, and fittings. Another significant application of Aluminium Bronze C95400 is in the aerospace industry. The material's high strength, good wear, and fatigue resistance make it suitable for manufacturing aircraft components, including landing gear parts, bushings, and connectors.
Table Of Content
What are the main properties and characteristics of Aluminium Bronze C95400 bars, rods, and wires?
Aluminium Bronze C95400 bars exhibit unique properties and characteristics that make them highly desirable for numerous applications. They possess excellent strength, combining high tensile and yield strengths, which enables them to withstand heavy loads and mechanical stresses. This property makes Aluminium Bronze C95400 bars suitable for applications that require robustness and durability. In addition to strength, these bars also offer exceptional corrosion resistance.
Aluminium Bronze C95400 rods possess important properties and characteristics contributing to their widespread use in various applications. One of their key attributes is a high strength, combining notable tensile and yield strengths. This inherent strength allows Aluminium Bronze C95400 rods to withstand substantial loads and mechanical stresses, making them suitable for structural integrity and durability applications. Additionally, these rods exhibit excellent corrosion resistance in atmospheric and marine environments.
Aluminium Bronze C95400 wires possess key properties and characteristics contributing to their wide applications. One of their primary features is their exceptional strength. These wires exhibit high tensile strength, allowing them to withstand significant mechanical forces and loads without deformation or failure. This strength makes Aluminium Bronze C95400 wires suitable for structural integrity and reliability applications. Another important characteristic of these wires is their excellent corrosion resistance. Aluminium Bronze C95400 wires exhibit resistance to both atmospheric and marine corrosion, making them well-suited for use in challenging environments.
Standard | ASTM B150 / ASME SB150 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size | Diameter: 3-~800mm |
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Wire Length | Cut Lengths: 0.125" to 72" No Limit on Spooled Lengths |
Wires Diameter | 0.0004" to 0.040" 10 microns to 1.0 mm Other Sizes on Request |
Wire Condition | M, Y, 1/2Hard |
Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Rectangular Size | 33 x 30mm to 295 x 1066mm |
Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Tempers | Tempers range from dead soft annealed to ultra spring temper |
Condition | Hardened & tempered, annealed |
Cold Rolled Bar Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Wire available in form of | Flat, Coil, mesh, Knitted wire mesh, spring, stranded and twisted |
Cu | Sn | Pb | Zn | Fe | Ni | Sb | P | S | Al | Si |
81.0 – 85.0*** | 6.3 – 7.5 | 6.0 – 8.0 | 2.0 – 4.0 | 0.20 max. | 1.00* max. | 0.35 max. | 1.50 max. | 0.08 max. | 0.005 max. | 0.005 max. |
Tensile Strength, min | Yield Strength, at 0.5% Extension Under Load, min | Elongation, in 2 in. or 50 mm min | Brinell Hardness (3000 kg load) | ||
ksi | MPa | ksi | MPa | % | typical BHN |
85 | 586 | 32 | 221 | 12 | 170 |
Ask Free Sample of Aluminium Bronze C95400 Bars, Rods, Wires Please Call On +91 9594327775 Or Mail Us On [email protected]
Contact Us