Raw Material Selection
The manufacturing process of flanges begins with the careful selection of raw materials.
A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production.
Table Of Content
A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production.
A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production. In order to ensure that our products are of the highest quality, we only use premium raw materials. A high level of quality standards is maintained by SHEETAL INDUSTRIES Manufacturers through stringent quality checks at every stage of production.
Standard | ASTM A182 / ASME SA182 |
Dimension | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
Flanges Size | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Pressure Class | PN 2.5 TO PN 400 |
Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
Table | D, E, F, H |
Types | Forged / Threaded / Screwed / Plate |
Form | Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange. |
Flanges Marking | All Flanges are marked as follows: Grade, Standard, Thickness, Heat No. (Or according to the customer’s request.) |
STANDARD | WERKSTOFF NR. | UNS |
Super Duplex S32760 | 1.4410 | S32760 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
Super Duplex S32760 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24 - 26 | 3 - 5 | 6 - 8 | 0.24 - 0.32 | 58.095 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
Density | lb/in3 | 0.28 |
Modulus of Elasticity | psi x 106 | 29 |
Coefficient of Thermal Expansion 68-212°F/°F |
x10-6/°F | 7.2 |
Thermal Conductivity | Btu/h ft °F | 8.7 |
Heat Capacity | Btu/lb/°F | 0.12 |
Electrical Resistivity | W-in x 10-6 | 31.5 |
Ask Free Sample of SDSS S32760 Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Flanges Please Call On +91 9594327775 Or Mail Us On [email protected]
Contact Us